honeycomb activated carbon

Honeycomb activated carbon has a honeycomb like appearance and is made from high-quality coal activated carbon powder as raw material, which is pressed by a honeycomb mold and activated by high-temperature carbonization. Products with large specific surface area, well-developed micropores, and high adsorption capacity are widely used in air pollution control. The honeycomb activated carbon adsorption method is used, which involves the contact of exhaust gas with porous activated carbon with a large surface area. The pollutants in the exhaust gas are adsorbed and decomposed, thereby achieving purification. Honeycomb activated carbon can remove pollutants to varying degrees, including nitrogen oxides, carbon tetrachloride, chlorine, benzene, formaldehyde, acetone, ethanol, ether, methanol, acetic acid, ethyl ester, styrene, phosgene, and odorous gases.

Widely used in various organic waste gas purification systems with low concentration and high air volume. Used for purifying and treating organic gases such as toluene, xylene, benzene, phenols, lipids, alcohols, aldehydes, odorous gases, and various gases containing trace metals. The environmental protection equipment using waterproof activated carbon has high exhaust gas treatment and purification efficiency, small adsorption bed volume, low equipment energy consumption, which can reduce costs and operating costs. The purified gas fully meets environmental emission requirements.

It can be directly used or placed in a purification cabinet or adsorption bed for use. If the exhaust gas concentration is high and the emission is large, two purification cabinets and adsorption beds can be used alternately. During use, try to avoid excessive temperature as it can reduce the adsorption capacity. The adsorption capacity decreases with increasing temperature, and the suitable desorption temperature is between 80-100 ℃; At the same time, high dust content and oil mist should be avoided, as tar dust mist can block the micropores of activated carbon, increase resistance, and reduce adsorption efficiency. If the usage environment contains a large amount of concentrated dust and tar, a pre stage dust removal filter should be installed to achieve the best use effect and longest service life. (Purpose of pre-treatment equipment: To reduce the temperature of exhaust gas, remove particles from dust, and avoid blocking adsorption pores.)

• ①Activated carbon should not be stepped on to prevent damage and affect its use.
• ②When storing, it should be placed in a dry environment to prevent flooding and render the activated carbon ineffective.
• ③Special emphasis! Waterproof honeycomb activated carbon is water-resistant, not waterproof. For detailed usage information, please consult customer service. It can be directly used or placed in a purification cabinet or adsorption bed for use. If the exhaust gas concentration is high and the emission is large, two purification cabinets and adsorption beds can be used alternately.
• ④During use, try to avoid excessively high temperatures as they can reduce the adsorption capacity, which decreases with increasing temperature.
• ⑤To avoid high dust content and oil mist, as tar dust mist can block the micropores of activated carbon, increase resistance, and reduce adsorption efficiency. If the usage environment contains a large amount of concentrated dust and tar, a pre stage dust removal filter should be installed to achieve better performance and longer service life. For more usage and technical issues, please contact us to answer your questions .....